Mitsubishi Lancer Evolution X FQ-400 (2010)

Download Wallpapers(39)
The Mitsubishi Lancer Evolution X FQ-400 is the fastest and most extreme version of Mitsubishi's motorsport derived machine. With 403bhp and 387lb.ft of torque on offer from its advanced, lightweight aluminium 2.0-litre turbocharged MIVEC (Mitsubishi Innovative Valve timing Electronic Control) petrol engine the FQ-400 is able to reach 62mph from standstill in an estimated 3.8 seconds before reaching an electronically limited 155mph - where permitted.

Traction and handling
Ensuring all the FQ-400's power is put to good use is Mitsubishi's sophisticated Super-All Wheel Control (S-AWC) four-wheel-drive system which appropriates power to the wheels that can best use it, giving the Mitsubishi Lancer Evolution X FQ-400 quite sensational cross-country performance.

The S-AWC system combines a number of electronic systems that both enhance the FQ-400's performance and safety, with Active Stability Control and Active Centre Differential, Active Yaw Control and Sport ABS giving the Mitsubishi Lancer Evolution X FQ-400 incredible cornering ability, traction and grip. Depending on the conditions the driver can select the most suitable set-up for the S-AWC system, three choices - Tarmac, Gravel and Snow - being offered via the wheel-mounted button and displayed in the central instrument binnacle.


Cornering stability
Increasing the FQ-400's cornering ability even further over its FQ relatives is a wider track and lowered suspension featuring Eibach springs and Bilstein Shock Absorbers. Lightweight 18-inch, nine spoke alloy wheels fitted with Toyo Proxes R1R tyres enhance the FQ-400's grip, giving it sharper cornering response on the road and more incisive steering. The enhanced agility and performance is backed by a revised braking system which uses aerospace grade aluminium alloys and floating sealed discs grabbed by high performance pads.

Extreme Power
To achieve the incredible 403bhp from just 2.0-litres Mitsubishi has had to significantly revise the FQ-400's advanced powerplant. Motorsport specification high-flow fuel injectors are fitted to the aluminium cylinder head and a new hybrid turbocharger is also fitted. The higher specification turbocharger features low-friction bearings, a high temperature turbine and strengthened thrust bearing to increase response and reduce turbo lag. Feeding the turbocharger cooled air, improving its performance and efficiency, is an enhanced intercooler, while the exhaust's gasses flow from the engine via a 3-inch diameter high flow stainless steel piping and catalytic convertor before exiting through a centrally positioned exhaust.

Mitsubishi has remapped the Engine Control Unit (ECU) extensively with over 500 hours of development time to allow its 2.0-litre turbocharged engine to not just produce its exceptional output but to do so with excellent driveability. The FQ-400's acceleration is sensational, it pulling hard through the gears regardless of engine revs. With peak torque of 387lb.ft on offer from just 3,500rpm, the Mitsubishi Lancer Evolution X FQ-400 is just as able to trickle through town traffic as it is taking a rally special stage.

A 'nod' to the Evo VI
The Mitsubishi Lancer Evolution X FQ-400 looks every bit the rally refugee too, giving a strong 'nod' to the styling cues of the legendary Evolution VI, and builds on the already aggressive style of its Lancer Evolution X FQ relatives.

A heavily vented bonnet helps heat escape from the FQ-400's turbocharged engine and a new lightweight composite front bumper incorporating Mitsubishi's trademark 'Jet Fighter' grille features carbon-fibre elements on its leading edges. Additional lighting and High Intensity Discharge (HID) lights mark out the FQ-400's nose, its added aggressiveness further enhanced by a 30mm drop in front ride height. Composite side skirts, a re-styled rear bumper with a carbon fibre diffuser, a rear wing incorporating a gurney strip and a roof-mounted 'Vortex Generator' all help manage airflow and cooling.

Behind the 18-inch lightweight, nine spoke alloy wheels it's possible to see the Alcon brakes on the front, while the Toyo Proxes R1R tyres underline the FQ-400's potency with their aggressive 'cut slick' tread pattern. Inside, the driver is held tightly against the FQ-400's sensational accelerative, braking and cornering forces in Recaro bucket sports seats, the range-topping Mitsubishi Lancer Evolution X also gaining an FQ-400 liveried handbrake handle and carbon fibre gearknob.

No compromise
Despite its obvious focus the FQ-400's suspension offers compliance thanks to the Eibach Springs and Bilstein Shock Absorbers, the FQ-400's usefulness as a daily driver not compromised overly thanks to Mitsubishi's chassis tuning. The stiff bodywork not only provides an exceptionally rigid platform for the suspension to work, but excellent crash-worthiness, the Lancer Evolution X attaining a five-star score in Euro NCAP's independent crash tests. The FQ-400's S-AWC and its incorporated stability, traction and braking systems helping avoid an accident in the first place. Even so there's reassurance of seven airbags, seat belt pretensioners and ISO Fix child seating all included in its standard specification.

Fully loaded
Standard equipment for the range-topping Lancer Evolution X model is comprehensive, the Mitsubishi Lancer Evolution X FQ-400 coming with Bluetooth hands-free telephone connection, a CD-tuner with 30 Gig hard drive, DVD satellite navigation and privacy glass. Convenience features like remote central locking, automatic headlamps and windscreen wipers increase the FQ-400's ease of use, the huge performance it offers not coming at the expense of usefulness. Like its Lancer Evolution X relatives it features comfortable seating for five as well as a usefully sized boot, the Mitsubishi Lancer Evolution X FQ-400 bringing all the convenience of the standard saloon car it's based upon - but with explosive performance potential.

Setting the standard
Standard it's not though, instead the Mitsubishi Lancer Evolution X FQ-400 is a standard setter, with performance that's the measure of any rival and many exotic sports and supercars costing many multiples of its £49,999 list price. Available from June 2009, the FQ-400 is covered by a three year / 36,000 mile warranty.

Aston Martin V12 Vantage (2010)

Download Wallpapers(55)
Aston Martin V12 Vantage, the most potent production sports car in the marque's 95-year history, made its debut at the 2009 Geneva Motor Show. Based on the hugely successful Aston Martin V8 Vantage, the V12 Vantage will feature a 6.0-litre V12 engine producing 510 bhp (380 kW / 517 PS), and 570 Nm (420 lb ft) of torque with a top speed of 190 mph (305 km/h) and 0-62 mph (0-100 kp/h) time of 4.2 seconds.

The latest incarnation of the Vantage family has been designed to provide a unique character, appealing to different driver tastes and complementing the other models in the current Aston Martin line-up.

The original Aston Martin V12 Vantage concept was unveiled to guests at the opening of the Aston Martin Design Studio in December 2007. Continuing the marque's impressive record of bringing concepts through to production, Aston Martin engineers have brought the Aston Martin V12 Vantage to market in an incredible 12 months.

Aston Martin Chief Executive Officer, Dr Ulrich Bez said: "This is the ultimate performance interpretation of the Vantage range, combining our most agile model with our most powerful engine. It represents the definitive driving package; providing spectacular performance to ensure a dynamically thrilling and everyday useable driving experience.

"The Aston Martin V12 Vantage has a unique character, one unlike our other cars. This will appeal to different people with different tastes, allowing more people to enjoy the Aston Martin experience.

"This also illustrates one of Aston Martin's key strengths - the ability to act quickly and turn concepts and ideas into reality."

Designed for the focused driver, every component of the Aston Martin V12 Vantage has been honed with pure driving enjoyment in mind. Benefitting from race-developed materials and components, and featuring lightweight carbon fibre; performance and agility have been tuned to perfection.

Visually enticing, the Aston Martin V12 Vantage expresses its performance potential through its purposeful stance created by enhanced aerodynamic and cooling aids optically widening the car, while retaining traditional understated Aston Martin design. Equally inviting, the cosseting interior permits the driver to extract maximum performance ability from the car while also enjoying customary levels of Aston Martin comfort on longer journeys. High levels of power and torque are available at all engine speeds making the Aston Martin V12 Vantage responsive and tractable in any driving situation.

The V12 Vantage will be built at Aston Martin's global headquarters in Gaydon, Warwickshire joining the DBS, DB9 and V8 Vantage model lines which are built in the state-of-the-art production facility combining hi-tech manufacturing processes with traditional hand-craftsmanship. Production will be limited up to 1,000 examples over the life span of the car, making the Aston Martin V12 Vantage a truly exclusive driver's car.

Aston Martin V12 Vantage: Performance
Agility and outright performance formed the basis of design for the Aston Martin V12 Vantage to produce the most exciting incarnation of the Vantage model line-up to date. Aston Martin's most powerful engine is fused with its most agile model to produce a truly exhilarating sports car.

The V12 power plant has been intelligently packaged into the Vantage's compact form preserving its perfect proportions. While the external dimensions of the V8 Vantage remain unchanged, the internal front structure has been extensively revised forward of the suspension towers to house the larger engine, brake cooling system, and twin air intake system.

The engine was designed at Aston Martin's headquarters in Gaydon, Warwickshire, and is hand-built at the company's dedicated engine facility in Cologne, Germany. To achieve the power output, the engine features a number of enhancements over the standard 6.0-litre V12 found in the DB9. These include a 'by-pass' engine air intake port that opens up at 5500 rpm, a revised induction system and re-profiled air inlet ports that further improve airflow into the combustion chamber to improve performance.

The naturally aspirated 6.0-litre V12 hand-built engine produces 510 bhp (380 kW / 517 PS) at 6500 rpm and 570 Nm (420 lb ft) of torque giving the driver access to high levels of power and torque at all engine speeds. Unique to the Aston Martin V12 Vantage is a 'Sport' button which allows the driver to choose between two powertrain modes.

The default 'normal' provides a more progressive, throttle response, suited to more everyday situations, such as driving in urban areas, heavy traffic, or in challenging weather conditions. Selecting 'Sport' mode delivers a sharper throttle response together with a sportier exhaust note. This mode is designed for use in more dynamic driving situations where sharper responses are required, extracting the maximum performance from the car.

The Aston Martin V12 Vantage benefits from Aston Martin's class leading all-alloy VH (Vertical Horizontal) architecture: a lightweight bonded platform that provides outstanding strength, rigidity and weight benefits.

Although the V12 engine weighs 100 kg more than the standard car's engine, intelligent use of lightweight materials and components including carbon ceramic brakes, lighter forged aluminium wheels, lightweight inner rear quarter panels and optional lightweight seats have resulted in the overall kerb weight being only 50 kg heavier than its V8 sibling. The ensuing weight distribution provides for balance that is near perfect (51:49).

Exclusively available with a six-speed manual transmission, the gearbox uses a transaxle configuration to aid weight distribution. The Aston Martin V12 Vantage's final drive ratio has also been modified from 3.909:1 to 3.71:1. This allows the Vantage to take full benefit of the high torque levels delivered by the engine to provide both flexibility at lower engine speeds as well as a high top speed of 190 mph.

For a car possessing such racing pedigree, the Aston Martin V12 Vantage surprises with its day to day usability. Featuring a luggage capacity of 300 litres and a traditional tailgate, coupled with ample stowage space to the rear of the seats, touring and trips away are made easy. Gear changes are light and precise requiring minimum effort from the driver and a longer final drive ratio extracts the most from the power and torque available to improve driveability. The communicative chassis provides comfort on long journeys and thrilling feedback with energetic driving.

Aston Martin V12 Vantage: Control
Aston Martin is the only sports car manufacturer to offer a race car for every GT category. The DBR9 has enjoyed year-on-year success all over the world in the GT1 category including class wins at Le Mans two consecutive years running. Customer teams are consistently achieving podium finishes with the DBRS9 in GT3 while 2008 was a test and development year for the newly-launched Vantage GT2. The Vantage N24 achieved GT4 class wins all over Europe since its launch in 2006. Common to both road and race cars is the VH architecture platform upon which the Aston Martin V12 Vantage is based. Consisting of extruded, pressed and cast aluminium alloy, bonded together with aerospace-grade adhesive, the backbone of the car works collaboratively with the powertrain and suspension to create an exceptionally responsive driving experience.

Near-perfect weight distribution is achieved with a transaxle-mounted gearbox which sees 85% of the car's weight lying between the front and rear axles. Aston Martin engineers have positioned the engine as far back and as low as possible in the car to contribute to the 51:49 weight distribution. Containing the weight within the Aston Martin V12 Vantage's wheelbase results in a low polar moment of inertia, creating a car which has a natural agility.

Superb handling characteristics are at the heart of the Aston Martin V12 Vantage; the rear suspension has been modified, with a more compact dual-rate spring design, in order to accommodate a wider wheel and tyre combination, improving grip and traction. The ride height of the Aston Martin V12 Vantage has also been lowered by 15 mm, while the spring rates have been stiffened by 45% and the anti-roll bars are 15% (front) and 75% (rear) stiffer than the standard car. These measures serve to lower the car's centre of gravity and reduce the amount of roll experienced during cornering, further increasing the Aston Martin V12 Vantage's dynamic capabilities.

Aston Martin V12 Vantage's diamond-turned 19" alloy wheels are manufactured using a forging process, saving a total of 5 kg, which reduces the overall weight of the car, as well as enhancing both ride and handling characteristics.

The new 10 spoke wheels are clad with wider Pirelli P Zero Corsa tyres which have been specifically designed for the Aston Martin V12 Vantage enabling it to generate the highest cornering forces of any Aston Martin; up to a peak of 1.3g is possible.

The Aston Martin V12 Vantage comes as standard with Carbon Ceramic Matrix (CCM) brakes, providing immense stopping power. Benefitting from carbon fibre's inherent properties, CCM brakes are not only tougher than conventional cast iron discs but also dissipate heat more rapidly resulting in less fade during sustained dynamic driving.

Air ducts positioned within the lower front grille feed air directly onto the discs to aid cooling and optimise braking performance.

The Aston Martin V12 Vantage's CCM discs are 398 mm in diameter at the front and 360 mm at the rear while the brake callipers feature six pistons at the front, four at the rear and have a larger brake pad area compared to the V8 Vantage. The CCM brakes are some 12.5 kg lighter than conventional brakes reducing not only the overall weight of the car but also the unsprung mass specifically. This benefits ride and handling and lower rotational mass helps improve acceleration.

In line with the character of the Aston Martin V12 Vantage, a revised Dynamic Stability Control (DSC) system permits the driver, through three modes of operation, to manage how the system intervenes during more challenging driving situations.

In default operation, the DSC is automatically switched on. Depressing the DSC button for two seconds selects 'track mode' which raises the manner and threshold at which the system intervenes allowing the driver to explore the limits of the car's considerable handling capabilities. Depressing the button for four seconds will switch off DSC completely.

Aston Martin V12 Vantage: Design
Based on the stunning V8 Vantage originally launched in 2005, the Aston Martin V12 Vantage subtly hints at its sporting intent with its controlled aggression and lower, purposeful stance. It is manufactured at Aston Martin's global headquarters in Gaydon, Warwickshire where all Aston Martins benefit from class leading levels of craftsmanship fused with cutting-edge technology.

Avoiding purely cosmetic changes, each modified panel on the Aston Martin V12 Vantage has been altered to enhance the vehicle's dynamics. Knowledge gained from the N24 race car programme has led to body revisions designed to improve downforce while not increasing the drag coefficient of the car. Each form follows its functional requirements, while also contributing to stunning design - a revised front splitter channels cooling air to the brakes and to the radiator while also producing increased down force. Bonnet louvres remove heat from the engine bay and help increase front-end down force by limiting the built up air pressure under the bonnet. New side sills derived from the N24 race car channel air towards the rear of the car rather than under it, reducing rear-end lift. A more pronounced boot 'flip' and the new rear carbon fibre diffuser work in harmony with a redesigned rear under floor to channel air through the new high-capacity oil cooler and maintain an area of low pressure under the rear of the car producing increased down force and aiding grip.

Complementing the taught exterior, the Aston Martin V12 Vantage's interior hints at the car's dynamic capabilities. The optional carbon fibre and Kevlar® composite seats cosset the driver providing support during spirited driving while remaining comfortable on long journeys. Saving 17 kg per car, the seats which are manufactured by a supplier to the motorsport and aviation industries are hand-trimmed by craftsmen at the Gaydon production facility.

The interior of the Aston Martin V12 Vantage provides the ideal environment for the focused driver to extract the very best from every element of the car. The extensive use of high quality materials with exceptional attention to detail placed throughout the cabin results in an unparalleled level of finish. The instrument cluster has been revised with even clearer dials to allow the driver to completely focus on the information being relayed from the car. The door pulls are made from beautifully-prepared carbon fibre where even the carbon weave has been meticulously aligned - a sign of exceptional craftsmanship. Additional light weight materials in the form of Alcantara are used to save valuable weight throughout the cabin. The unique ambience of the Aston Martin V12 Vantage interior beautifully marries the functional requirements of a driver-focussed sports car with the comfort of an everyday practical car.

Brabus Mercedes-Benz E-Class Coupe (2010)

Download Wallpapers(13)
The new Mercedes-Benz E-Class Coupe just went on sale and Brabus already presents an extensive tuning program for the new two-door. The pinnacle of the available performance tuning is the Brabus 6.1 displacement engine. It has a rated power output of 462 hp (456 bhp) / 340 kW and propels the E 500 (US: E550) to an impressive top speed of 315 km/h (196 mph). Also on offer is an aerodynamic-enhancement program that was developed in the wind tunnel. Further highlights are custom-tailored wheels up to 20 inches in diameter, sporty yet comfortable suspension solutions and exclusive interior options.

A rated power output of 462 hp (456 bhp) / 340 kW and a peak torque of 615 Nm (453 lb-ft) at just 3,100 rpm are the result of the displacement increase of the four-valve V8 engine from 5.5 to 6.1 liters. 0 - 100 km/h (62 mph) in 4.7 seconds and a top speed of 315 km/h (196 mph): The Brabus 6.1 displacement engine turns the E 500 Coupe into a true high-performance automobile.

The displacement increase of the eight-cylinder engine sells for 29,000 Euros. It is facilitated by the installation of a billet crankshaft with longer stroke and larger pistons. Furthermore the four-valve cylinder heads are precision-machined and fitted with custom camshafts. The Brabus sport exhaust system with high-performance metal catalysts also contributes to the impressive power output as do specially programmed engine electronics.

More driving fun with the turbodiesel models is available with the Brabus ECO PowerXtra kits. For the E 250 CDI BlueEFFICIENCY Brabus offers its D4 tuning kit. For just 1,390 Euros power output of the common-rail four-cylinder engine jumps from standard 204 hp (201 bhp) / 150 kW to 235 hp (232 bhp) / 173 kW. Peak torque grows to 560 Nm (413 lb-ft).

The V6 turbodiesel engine of the E 350 CDI BlueEFFICIENCY equipped with Brabus ECO PowerXtra D6 (III) module produces 272 hp (268 bhp) / 200 kW and a peak torque of 590 Nm (435 lb-ft).

All engines are lubricated with ARAL high-performance motor oil and like all Brabus components they are backed by the one-of-a-kind Brabus Tuning Warranty® of three years, up to 100,000 kilometers or 62,000 miles (see Brabus warranty conditions as of November 2006).

Stainless-steel Brabus quad sport exhaust systems are available for all new Mercedes-Benz E-Class models.

The Brabus designers have also developed a sporty yet elegant aerodynamic-enhancement package for the two-door E-Class. It is manufactured from Pur-R-Rim in OEM quality. The Brabus front spoiler with integrated LED daytime running lights gives the coupe an even more striking face and reduces aerodynamic lift on the front axle at high speeds.

Brabus adds sporty highlights to the sides with new aluminum front sport quarter panels with integrated clear-coated carbon-fiber inserts. New rocker panels visually give the coupe a lower and sleeker stance. They feature LED entrance lights integrated into their undersides. Customers can also choose a version with integrated illuminated Brabus logo.

The Brabus rear apron features a centrally mounted reflector and custom-tailored cutouts on either side for the four tailpipes of the Brabus sport exhaust system.

The exclusive Brabus appearance is rounded out by one-piece or multi-piece Brabus Monoblock light-alloy wheels with diameters of 17, 18, 19 and 20 inches. The largest tire/wheel combination features Brabus Monoblock VI, E, Q or S wheels in size 9Jx20 on the front axle and in size 9.5Jx20 in back. High-performance tires from Brabus technology partners Pirelli and YOKOHAMA are mounted in size 235/30 ZR 20 in front and in size 265/25 ZR 20 on the rear axle.

The available Brabus suspension solutions offer sporty handling combined with excellent ride comfort. They were custom-developed for the various engines available in the new E-Class. The list of options starts with lowering springs and culminates in a complete height-adjustable coil-over sport suspension.

Brabus also offers a high-performance brake system for the new Mercedes-Benz E-Class Coupe. It features six-piston aluminum fixed calipers and 360-mm (14.2 inches) vented and cross-drilled discs on the front axle. The rear axle stops with four-piston aluminum fixed calipers.

Brabus will customize the interior of the new Mercedes-Benz E-Class Coupe to customers' specifications. The list of interior options includes stainless-steel scuff plated with illuminated Brabus logo, an ergonomically shaped Brabus sport steering wheel and an entirely new interior crafted from especially soft yet durable Brabus Mastik leather and Alcantara.