Pagani Zonda R (2009)

You can download 30 hi-res wallpapers of this Zonda R right here>>>Download Pictures

Pagani Zonda is never shy of a drive at the racetrack, a fact that was proven numerous times in the past with records for production vehicles at the Nurburgring Nordschleife. With the input of its avid track focused customers, the Pagani team has created the Pagani Zonda R using bespoke engineering solutions to meet the performance demands for a trackday version of the highly popular Pagani Zonda F.
The central monocoque is made of a Carbon-Titanium composite, increasing rigidity while reducing significantly the weight. Bolted directly to the chassis is the Mercedes AMG 6.0 litre race derived V12 engine, with 750 hp and 710 Nm of torque. A direct throttle actuation via mechanical cable ensures immediate throttle response.
The Xtrac Magnesium cased dog ring gearbox combined with tha Automac Engineering AMT system performs gearshifts in 20ms, triggered by the drivers input on the paddles behind the steering wheel. A 12-way Bosch Motorsport traction control and ABS system allows the driver to fully adjust the settings while driving the Pagani Zonda R.
At the pits, each driver will be able to find a suitable setup thanks to a fully adjustable suspension and wing configuration. The effectiveness of the rear is matched by a complex new front bonnet, a masterpiece realised with the help of models by Ennegi, as well as the closed underbody and rear diffusor. Aerodynamic setups rage from a high downforce setting of 1.500kg to a 350kmh top speed setting.
Aspa forged AvionAl suspension components as well as machined structural ErgAl parts holding the engine and gearbox have been designed to reduce the weight of the overall car, Poggipolini Titanium screws are used on the whole car. These measures lead to a dry weight of 1.070 kg.
The interior has been designed to offer a perfect environment for the driver. The controls are limited to the indispensable, but the quality finish reflects the usual demanding Pagani standards. The bespoke Toora seats are FIA homologated and comply to latest HANS standards, five-point safety belts and a CrMo roll-cage assure the occupants' safety.
The lucky owners of the Pagani Zonda R will experience a level of performance on the track, that is simply not possible on the road. A power-to-weight ratio of 701 hp-per-ton will catapult them from 0 to 60 mph in less than 2,7 seconds, the Brembo carbon ceramic brakes ensure the car comes to a standstill even quicker.
The Pagani Zonda R is built in a limited production run and sold at a price of 1.460.000 Euro plus taxes, a performance machine, a track toy, a collectors item, a masterpiece signed by Horacio Pagani.
Technical DataEngine Type: Mercedes-Benz AMG - M120 - 12 cylinder V 60°, 48 valves; displacement 5987 ccm, dry sumpMax. Power: 750 hp (551 kW) @ 7.500 rpmMax. Torque: 710Nm @ 5.700 rpmStroke: 80,20 mmBore: 89,00 mmTraction control: 12 Stage - Bosch Motorsport traction control systemIntake: Single throttle bodies, mechanically operatedExhaust system: Hydroformed Inconel, ceramic coatedTransmission: Longitudinal mid engine; rear wheel drive with self-locking differentialGearbox: XTRAC 672 bespoke magnesium casing gearbox, 6 speed sequential dog gearchange with Automac Engineering AMT systemCarbon-ceramic brakes: 4 ventilated Brembo disks, hydraulic power brake 12 Stage - Bosch Motorsport Race ABSDiscs Front: 380x34 mm 6 piston caliperRear 380x34 mm 4 piston caliperWheels: Forged alloy APP wheels; 19" front, 20" rearTyres: Pirelli P Zero Zonda R: ant. 255/35/19; post. 335/30/20Suspensions: 4 independent wheels with double A-arm; Forged Avional suspension arms; pull rod helical springs and Öhlins adjustable shock absorbersStructure: Central carbon-Titanium chassis, Engine is a stressed member; front and rear Cr Mo space frames; bodywork carbon fiber MD SystemDimensions Length: 4886 mmWidth: 2014 mmHeight: 1141 mmWheelbase: 2785 mmDry weight: 1070 kgSafety: Roll cage in Cr Mo steel; carbon fibre seats HANS compatible; five point harness0-100 km/h: 2,7 secTop speed: > 350 km/hWeight-to-Power ratio: 1,43 kg/hp

Pagani zonda R

While one certainly cannot say the Zonda F lacks performance figures, driving around the Nurburgring in 7:32 and achieving lateral G forces of almost 1.5 G, it is however a road car, easy to drive, intuitive and setting the benchmark for comfort, safety and lightweight. Paired with a quality finish and the attention to detail this made the Zonda F one of the most desirable supercars resulting in the 25 Coupe models being sold out in record time. This did not seem to fulfill the requirements of our most demanding customers, who adore the weekend drive on a racetrack.

The spark has been set by an Italo-American customer, enthusiast and already proud owner of 3 Zondas. He describes the project this way: “The thought has been on my mind for quite some time, but I am not interested in racing”.

The Zonda R is born with full liberty. The target: the ultimate performance at the racetrack without any implications of rules, except for safety, where no compromise is allowed. In September 2006 the first drawings were ready, but it was crucial to have the support of Mercedes-AMG for a high revving engine with a power output of 750 bhp, dry sump, light and with a low center of gravity. The basis was the self supporting engine of the mighty CLK GTR, which has dominated the GT championships.

Eve at constant racing pace the engine would have to cover over 3100 miles (5000 kilometers) before servicing.

The Zonda R is a car designed from scratch, with only 10% of the Zonda F components to be carried over. The suspension forged in Avional, a new Pagani six speed transversal sequential gearbox, carbon-fiber monocoque, aeronautical four pump fuel tank are only part of the equation.

The wheelbase has grown by 2 inches, the overall length by 5 inches and the track is increased by 2 inches. The bodywork and aerodynamics have been studied to offer maximum downforce. Even though built for the track, the project would not have received kick off, if the quality and finish of the car and its details was not up to the level of the Pagani road cars.

One of the first cars to be delivered however will be kept in a living room, designed by Pagani and built with the same materials as the Zonda F, beautifully textured carbon-fiber, avional, titanium, inconel and other state of the art materials. Additionally it will feature a bespoke HiFi System that will allow the customer to listen to the sound of this car at Le Mans and the Nurburgring.

The Pagani customers who have ordered the Zonda R will be relieved of almost $1,6 million + taxes.

The Track is its Home

This Zonda is purpose made for track use, without restrictions of any competition rules or homologation, with the only exclusion of the passengers’ integrity, where no compromise is tolerated.

A New Heart

The engine is built by the racing specialists at Mercedes AMG, where the championship winning DTM cars are born, as well as the CLK GTR, probably the most devastating and effective weapon ever to compete in the GT series. From it’s engine the Zonda R borrows the basic architecture including an ingenious dry sump allowing a low centre of gravity. This self-supporting engine with 750 bhp at 8000 rpm and 425 lb-ft of torque carries a lightweight carbon-fiber high-performance intake system, a racing multiple disc sintered clutch and Formula 1 style exhaust system, hydroformed in Inconel 625 and ceramic coated for optimal heat dissipation. The power unit combined with a 6 speed transversal manual sequential synchronized gearbox is designed to satisfy the most ambitious drivers.

The Chassis

The central carbon chassis will incorporate a roll cage and a rubber racing fuel tank with 4 fuel pumps and quick refuel filler like on GT race cars. The wheelbase has been increased by 2 inches to offer the best stability. The front and rear subframes are brand-new, built to accommodate a new suspension geometry, produced in avional. The magnesium forged rims with central wheel nut and a quick pneumatic lifting system allows fast and effortless changes of the slick tires.

Bodywork and Aerodynamics

The new bodywork has been honed to offer elevated downforce even in low speed corners. The longer front bonnet with flaps, closed underbody and the rear overhang with the adjustable rear wing and race derived diffuser translate into shattering aerodynamic efficiency and will let you experience cornering speeds beyond imagination. The car displays and logs information about the amount of dowforce that the car is generating at each moment. Combined with the adjustable wings you can easily find the best setup for each track.

Workstation

The interior is designed to accommodate the driver and passenger in bespoke seats, built to offer the best support, when the G-forces from the vehicle dynamics come into question. The Digitek instrumentation provides the essential information and a sophisticated telemetry allows through a variety of sensors to monitor every single component of the car.